- Transformers
- Silicone Insulator
- Ceramic-insulator
- Polyethylene Pin Type Insulator And Accessory
- Silicone Surge Arrestor
- Fuse Cutout Switch
- Isolator Switch
- New Develping Products
- End Insulator Fitting
- Cutout Fitting&Accessory
- Winding Mov Suge Arrestor Core
- Cable Cover&Pinpost-housing
- Bushing
- Silicone Rubber
- Ring Main Unit
- EV Charger
- Epoxy Bushing
- Cable Kit
- FRP POLE
- FRP ROD
FRP POLE
| FRP POLE | |||||||||||
|
FIBERGLASS REINFORCED POLYMER(FRP) POLE |
|||||||||||
| item | 1.1 | 1.2 | 2.1 | 2.2 | 3 | 6 | 7 | 8 | |||
| Total length | m | 8 | 8 | 8.7 | 9 | 9 | 12 | 12 | 12 | ||
| Maximum conicity | mm/m | 15 | 15-1 | 8 | |||||||
|
Diameters |
Exterior |
Top | mm | 150 | 150 | 150 | 150 | 300 | 150 | 180 | 150 |
| Maximum base | mm | 263 | 270 | 280 | 285 | 285 | 330-366 | 360-396 | 360-396 | ||
| Workload | Kg | 150 | 200 | 200 | 200 | 300 | 200 | 400 | 500 | ||
|
Safety factor at minimum nominal breakage |
2 | ||||||||||
|
Manufacturing process |
Roll molding | ||||||||||
|
Exterior finish |
Skin system,type C vell with polyester top coat unsaturated | ||||||||||
|
Permanent deformation |
<1% deflection at operating load | ||||||||||
|
Hole finishes, marking and others |
According to drawing ECI-030 | According to drawing ECI-031 | |||||||||
|
of polyester resin per pole/ Fiberglass |
% | 45% | |||||||||
| Bending at operating load | % | <10% | |||||||||
| Water absorption | % | <0.6% | |||||||||
| Advantages of FRP Poles | |||||||||||
| Excellent mechanical properties | |||||||||||
| Non-conductive and excellent insulation property | |||||||||||
| Safe in accident cases . | |||||||||||
| Anti-corrosion and rust free - especially suitable to be used under extreme weather condition including high humidity coastal area, desert,oil field, high altitude and industrial area with acid and alkali condition. | |||||||||||
| Light weight, around 1/3 weight of the steel lighting pole.Easy installation and save on labor, time and equipment. | |||||||||||
| Maintenance free，long life span. | |||||||||||
| Aesthetics, smooth surface with good finishing. Alsocan be color matched to suit any environment。 |
|||||||||||
| Note : We can design and produce according to customer specific requirements. | |||||||||||